Abrasion-Resistant
Sleeves
Braided
Polyester Chafe Guard
AE501(601/AE701 Hose), AE546(AE246
Hose), AE566(666,667 Hose)
Aeroquip hose assemblies with Braided Polyester Chafe Guard are manufactured
by braiding polyester yarn onto wire braid covered hose styles. The tough polyester
braid withstood 1,000,000 abrasion test cycles without exposing the wire braid.
This cover adds minimal weight and does not impair hose flexibility. It has
a temperature range of -65°F to +300°F. Aeroquip Braided Polyester
Chafe Guard provides superior performance and is highly recommended for most
sleeve applications. However, another type of sleeve should be used when environmental
conditions (such as temperature) prohibit the use of Braided Polyester Chafe
Guard.
AE138
(646) Chafe Sleeve
AE138 has a tough synthetic rubber scuff cover, which is fuel, oil and ozone
resistant. It protects against abrasion and scuffing in ground-servicing or
airborne applications through a temperature range of -65°F to +250°F.
AE208
(900005) Protective Coil
The AE208 lightweight nylon protective coil resists abrasion at temperatures
from -65°F to +2OO°F, and will retain its shape when flexed through
a temperature range of -65°F to +250°F. The coil is wound, or spirally
wrapped, around the hose.
The
natural gaps between coils reduce the possibility of entrapping
moisture. This sleeve is recommended where hose assemblies
are exposed to moisture, as well as abrasion.
AE251
(900961) Shrink Sleeve
This heat-shrinkable Polyolefin tubing is recommended where a skin-tight fit
is desired. The sleeve is positioned between the end fittings and shrunk onto
the hose by controlled heat. It has a recommended operating temperature range
of-65°F to +275°F.
AE506
(900179) Telfon sleeve
An extruded, translucent, seamless FEP Teflon tube; this sleeve is unaffected
by fuels, lube oils, coolants or solvents used in aircraft service. It is recommended
for abrasion protection in high temperature applications. Its temperature range
is -65°F to +400°F.
Fire-Resistant
Sleeves
Integral
Silcone Covered Firesleeve Hose
AE401(601/AE701 Hose), AE446(AE246
Hose), AE466(666,667 Hose)
Aeroquip
silicone covered hose has an asbestos free cover, which adheres
directly to the wire braid to form a smooth, tight bond. The cover’s
integral design provides excellent chafe resistance, prevents “internal” sleeve
chafing when band clamped and prevents fluid wicking. This hose/cover
combination meets fire test requirements of TSO-C53a and TSO-C75
(specific types vary with each hose style). The silicone cover
has a temperature range of -65°F. to +450°F. Contact Aeroquip
for detailed information.
AE102
Firesleeve
AE102 firesleeve is used to meet the fire resistance requirements of FAA TSO-C53a
and TSO-C75. This firesleeve can be identified by its orange colour outer surface.
It functions effectively within a continuous operating temperature range of
-65O°F to +450°F.
AE272
Firesleeve
A field replaceable firesleeve; this Flexwrap sleeving has a silicone impregnated
fibreglass cloth construction. It also has a split sleeve design, which makes
it easier to install over hose assemblies regardless of end fitting configuration.
AE272 Flexwrap meets TSO requirements for medium and high pressure Teflon hose
assemblies. It has a recommended operating temperature range -65°F to +45O°F.
Click
here to download Eaton's engineering bulletin AEB250
Click here to download Eaton's Catalog TF100-11A (Repairing Silicone Hose) |
